Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Temple City, CA
Garage door installation in Temple City runs $700 – $2,200 for a new door, with most post-war bungalow retrofits landing between $900 and $1,600 because of the odd-sized openings this city was built with. We’re Anvil Garage Door Repair, and we handle the full system: doors, openers, tracks, springs, and panels on whatever brand you already own. Call (877) 705-2052 for a free estimate on any garage door work in the 91780.
Why Temple City Homes Are Different
Temple City is a small, built-out San Gabriel Valley bungalow city. Most of the 91780 housing stock went up between 1945 and 1965, and that single fact changes nearly every garage door job we take here. These are single-story ranch and Spanish-influenced homes on small lots. The original garages were built for one car, with wood-frame headers and openings that don’t match anything sold off the shelf today. Many still have the original manual doors.
The hot, dry Gallatin Valley summers beat on west- and south-facing doors all afternoon. That sun dries out wood panels, cracks them, blisters paint, and turns weather seals brittle, and it does it year after year. We don’t get freezing winters, so you won’t deal with ice damage, but Santa Ana winds push dust and grit into tracks and rollers, accelerating wear. On top of that, the older blocks have narrow, often shared or alley-fed driveways with tight property-line setbacks. Low-clearance and limited side-room torsion setups are routine here. A standard door or opener frequently won’t fit without field modification. That’s the norm, not the exception, in Temple City.
Styles & brands we work with
Our Main Temple City Services
Most Temple City homeowners call us for one of two things: a door that stopped working or an opener that won’t respond. We service every part of both systems, and the same team handles either problem in one visit.
Garage Door Repair in Temple City
Broken springs, snapped cables, off-track rollers, dented panels: these jobs make up the bulk of our work in Temple City, and the older the house, the more often they show up together. A spring on a 1950s wood door carries more weight than most people realize, and when it fails, the door usually won’t budge by hand. We diagnose the whole system when we arrive, not just the obvious break, because one failed part often stresses everything around it. For full details on what we fix and what it costs, see our dedicated Garage Door Repair in Temple City page.
Garage Door Opener Repair in Temple City
Openers on Temple City homes are often newer than the doors they drive, but they still fail: stripped gears, burned-out circuit boards, misaligned safety sensors, and remotes that lose signal. We treat opener repair as its own skill, not an add-on, because we carry parts on the truck for LiftMaster, Chamberlain, Genie, and Craftsman units and can usually diagnose the problem in the driveway. You can see the full scope of opener work at our Garage Door Opener Repair in Temple City page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Temple City
Most Temple City installation jobs are retrofits, not new construction. A homeowner has a warped 1950s wood door or a rusted single-car door on an opening that measures 8 feet wide when modern doors are built for 9, and the job becomes about fitting the existing opening correctly rather than simply hanging what the box store sells. The hot afternoon sun on west-facing doors means we recommend and install doors with UV-stable panels and heavier weather seals here more often than in coastal cities. When our technicians quote a replacement in Temple City, they account for the header condition, side room, and track path before recommending anything, because the wrong door on an old opening costs you more in frame work than the door itself. We handle the full scope from measure to haul-away through our Garage Door Installation service.
Garage Door Replacement
Signs you need it
Wood rot through the bottom panel, cracked sections that flex when the door moves, or a door so heavy the springs struggle to lift it are the three signals we see most in Temple City.
What it costs in Temple City
A full new door in Temple City runs $700 – $2,200, with most single-car retrofits on 1940s – 60s openings landing between $900 and $1,600 including standard hardware.
How we do it
We measure the existing opening and side room first, match the door size and track style to the header and clearances already there, then remove the old door, hang the new one, set the spring tension, and test the full travel.
Garage Door Installation Service
Signs you need it
A new home purchase with a missing or boarded-up door, a door stripped by a previous owner, or a conversion from a manual door to an automatic system all require full installation.
What it costs in Temple City
Opener installation runs $250 – $550, and a new door installation runs $700 – $2,200; if we install both together, you pay one trip charge and one labor window.
How we do it
We remove any old hardware, set the track to match the opening, hang the new door, install and program the opener, then align sensors and reverse-safety settings before we call the job done.
Garage Door Seal Installation
Signs you need it
Daylight visible under the closed door, a bottom seal that flakes when you touch it, or dust and leaves piling in along the threshold every Santa Ana season means the seal has failed.
What it costs in Temple City
Seal replacement falls under general garage door repair, with most Temple City jobs landing in the $150 – $600 range depending on whether the retainer is intact or needs replacement too.
How we do it
We pull the old seal, check the aluminum retainer for bends, cut the new seal to the exact door width, slide it through, and trim the ends so it sits flat against the concrete.
What Garage Door Installation Costs in Temple City
| Item | Typical range in Temple City |
|---|---|
| New door installation | $700 – $2,200 |
| Opener installation | $250 – $550 |
| Panel replacement (per panel) | $250 – $500 |
What pushes the price up in Temple City is the opening itself. Nonstandard widths, low headroom above the header, and limited side room mean we sometimes have to modify track or build out framing before a new door can be hung. You’ll get a fixed quote before any work starts, and the number we quote is the number you pay.
How long does garage door installation take in Temple City?
Most single-door retrofit installations in Temple City finish in one day, four to six hours on site. If the opening needs framing work or we’re converting a manual door to automatic, expect a second visit.
Can you install a new door on an old Temple City garage?
Yes, and that’s most of what we do here. We work around the existing wood header, match the door to the old opening, and reuse what’s still solid rather than pressing you into a full frame rebuild.
Brands We Service in Temple City
We work on the door and opener brands Temple City homes already have: LiftMaster, Chamberlain, Genie, and Clopay are the most common in the 91780. Our technicians are factory-familiar with all of them, and we carry common parts locally for faster turnaround. See our brands for the full scope.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Temple City, CA
| Service | Typical range in Temple City |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
| General garage door repair | $150 – $600 |
Two things push Temple City prices toward the upper end of those ranges. The first is old framing: when a 1950s header isn’t square, proper installation takes more shimming and bracing. The second is nonstandard openings, which force us to modify track or order custom-width doors. Whatever the job, we quote the full price before any work begins, and we don’t add a line item after you’ve approved it.
Neighborhoods We Serve in Temple City
We run calls across the entire 91780, from the older bungalow blocks near the old town center to the post-war tracts and the newer infill over toward the San Gabriel border. Our techs know which neighborhoods have the tightest side yards and which alleys are hardest to back a truck down.
- Original 1940s – 50s blocks north of Las Tunas Drive
- The bungalow streets around Temple City High School
- The rebuild-heavy blocks near Live Oak Park
- Newer two-story infill along the eastern edge of the 91780
- Alley-fed homes near the Little League fields on Oak Avenue
Response time across Temple City runs one to four hours for repair calls, depending on when you call and where our nearest truck is working that day.
Service Area – Cities Near Temple City
Anvil Garage Door Repair serves Temple City and the surrounding San Gabriel Valley. If you’re in North El Monte, CA, Rosemead, CA, San Gabriel, CA, or Arcadia, CA, the same team covers your area with the same parts stock and the same upfront pricing.
Serving Temple City, CA — Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Temple City
Yes. We run repair trucks through the 91780 every weekday and most Saturdays, and same-day service is available for spring, cable, and opener failures. Call (877) 705-2052 and we’ll give you a real arrival window, not a four-hour spread.
Most door and opener replacements don’t need a permit in Temple City, since you’re swapping an existing door on an existing opening. If we run into a condition that does require one, we’ll tell you before any work starts.
No. We give free estimates on all garage door and opener work in Temple City, and the price we quote before work starts is the price you pay. Call (877) 705-2052 to schedule a look.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Temple City Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
— Bethany Bennett"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
— David Kim"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
— David Yang