Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Mentone, CA
Garage Door Installation in Mentone comes with a set of challenges most coastal towns never face. The older ranch homes here, many built between the 1950s and 1980s, often have non-standard rough openings from owner-built additions. That means a stock door rarely fits without modification. Add the intense inland heat and Santa Ana dust, and you need an installer who understands what actually holds up at the base of the foothills. We work on the brand you already have, and when it’s time for new, we size the job to the opening we find, not the opening a catalog assumes. Call (877) 705-2052 for a free estimate.
Why Mentone Homes Are Different
Mentone sits in the hot, dusty foothills east of Redlands, where blowing grit from Santa Ana winds and unpaved horse-property driveways works into garage door tracks and rollers faster than in neighboring towns. We see it every summer: temperatures push past 100°F, lubricants dry out, and the fine silt off those dirt driveways coats every moving part. A door that runs smooth in March can grind by July.
The housing stock compounds it. Most of Mentone is single-story ranch and rural property on large lots, with attached or detached one- and two-car garages. A lot of those garages still have the original wood or early steel doors. And because many were owner-built or added on decades ago, the rough openings don’t match modern standard sizes. That matters when a door finally fails and the homeowner discovers a box-store replacement won’t drop in without reframing.
What we’ve learned working in Mentone since 2017 is that this town rewards a retrofit mindset. The job is rarely just swapping like for like. It’s shimming, reinforcing, and matching old framing to new hardware. Our team plans for that from the first measurement.
Styles & brands we work with






Our Main Mentone Services
Most Mentone homeowners call us for one of two reasons: the door itself has failed, or the opener that drives it has quit. Here’s how each works in this town.
Garage Door Repair in Mentone
After a Santa Ana event, garages across Mentone’s horse properties jam with fine silt. Tracks pack up, rollers seize, and cables start fraying against the grit. We clean the track, replace worn rollers, and get the door running before the opener overheats from fighting the extra drag. Garage Door Repair in Mentone covers springs, cables, panels, and track work, all done to the Anvil standard.

Garage Door Opener Repair in Mentone
Opener problems here come in two flavors: heat-fried circuit boards from unconditioned garages, and stripped gears from doors that never got cleaned after the winds. We treat opener repair as its own skill, not a side errand. Garage Door Opener Repair in Mentone covers motor, gear, sensor, and remote issues on Genie, Craftsman, LiftMaster, and the other major brands.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Mentone
Garage Door Installation in Mentone rarely follows a cookie-cutter script. The older single-story ranch homes and rural properties here weren’t built to modern door specs, so we measure first and order second. Whether it’s a full Garage Door Installation on a new rough opening or a replacement on a 1960s single-car garage, the goal is a door that seals tight against dust and handles the inland heat without warping.
Garage Door Replacement
Signs you need it
Your door sags in the middle, the wood panels have rotted or split from heat cycles, or the bottom panel is bent from a bump and the door binds every time it cycles.
What it costs in Mentone
New door installation in Mentone runs $700 – $2200 depending on size and material, with panel replacement at $250 – $500 when the frame is still sound.
How we do it
We measure the actual opening, account for the slope and settling common on older Mentone slabs, remove the old door, hang the new one, and balance it for smooth travel.
Garage Door Installation Service
Signs you need it
You’ve built a new detached garage or converted a carport, and you need a door sized to the rough opening you actually have, not the one a big-box catalog assumes.
What it costs in Mentone
A fresh installation runs $700 – $2200, and opener installation adds $250 – $550 if the electrical isn’t already in place.
How we do it
We inspect the framing, set the track, mount the door, install weatherstripping cut for Mentone’s dust load, and tie the opener in if you want it done the same day.
Commercial Garage Door Installation
Signs you need it
Your shop or equestrian building’s door has finally failed, and downtime means lost work or horses stuck inside.
What it costs in Mentone
Commercial jobs in Mentone fall in the $700 – $2200 range depending on door size and duty cycle, quoted before we start.
How we do it
We size the door for the opening and the duty cycle, reinforce the track for daily use, and install a door that won’t bind when the wind kicks dust into the guides.
Garage Door Installation Contractors
Signs you need it
A previous owner added a garage with a non-standard opening, and no off-the-shelf door fits without heavy modification.
What it costs in Mentone
Budget $700 – $2200 for installation on non-standard openings, with the final figure locked before any work begins.
How we do it
We build a door plan around the existing framing, order to the actual dimensions, and install with the reinforcement a retrofit opening needs.
Garage Door Seal Installation
Signs you need it
Daylight shows under the door, or a line of fine dust forms inside the garage after every Santa Ana wind event.
What it costs in Mentone
Seal and weatherstrip replacement runs $110 – $220, a small price for keeping Mentone’s dust outside where it belongs.
How we do it
We pull the old seal, clean the channel, and install a new bottom seal and side weatherstripping sized for the door and the slab’s unevenness.
What Garage Door Installation Costs in Mentone
| Item | Typical range in Mentone |
|---|---|
| Panel replacement | $250 – $500 |
| Opener installation | $250 – $550 |
| New door installation | $700 – $2200 |
How long does a garage door installation take in Mentone?
Most single-door installations take four to six hours on site. Non-standard openings and older framing can stretch that to a full day.
Will the price change once you see my garage?
No. We quote after measuring, and the price we give you is the price you pay. Nothing changes on install day.
Brands We Service in Mentone
We work on the brand you already have. In Mentone, that means a lot of Genie and Craftsman openers on older doors, plus Clopay and Wayne Dalton doors that have been on these homes for decades. Parts for these brands are stocked on our trucks or sourced same-week. Our brands coverage means one call handles the whole system.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Mentone, CA
| Service | Typical range in Mentone |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
| Garage door repair | $150 – $600 |
In Mentone, two things push a job toward the upper end of these ranges: non-standard openings that require retrofit work, and doors that have been running dry in summer heat for years. The quote you get is the price you pay, agreed before we touch a single bolt.
Neighborhoods We Serve in Mentone
We cover all of Mentone, ZIP 92359, from the older ranch streets near the 38 to the larger horse properties off the unpaved drives. Typical response is same-day or next-day for repair calls.
- Mentone town center
- Mentone foothills
- Horse properties east of town
- Ranches off Greenspot Road
- Homes near the 38 corridor
Service Area – Cities Near Mentone
Anvil Garage Door Repair also covers the neighboring foothill and valley communities. If you’re in Redlands, CA, Yucaipa, CA, Highland, CA, or Calimesa, CA, we can send a technician your way. Same team, same upfront pricing.
Serving Mentone, CA — Our Local Coverage Area
We’re based in the Mentone area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Mentone
Yes. We serve every home in ZIP 92359, from the town center to the outlying horse properties and ranches. If you’re inside Mentone, we’ll come to you.
Most direct door replacements don’t require a permit. If you’re changing the rough opening or adding a new door where one didn’t exist, the county may want a quick review. We’ll tell you before we start.
Repair calls typically get same-day or next-day scheduling. Installation is scheduled after measuring and ordering, which usually takes about a week. Call (877) 705-2052 and we’ll give you a straight answer.
Need a door fixed or a new one installed in Mentone? Call Anvil Garage Door Repair at (877) 705-2052 for a free estimate. Your door. Fixed right.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Mentone Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
— Bethany Bennett"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
— David Kim"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
— David Yang